Our article provides an overview of modern sliding automatic gates: what materials they are made of, what they are, etc.d.
In recent years, outdoor automatic gates of various brands and models have become very popular among the population. Often used in industrial buildings. Thanks to these gates, you can easily drive a truck or car inside. In this case, you do not have to pay attention to the size of your vehicle.
But be aware: incorrectly selected gates have serious resistance to the entire process of closing and opening. Before you stop the choice on one or another system, you need to learn how to understand the design of the gate.
If the height of your prospective gate will be higher than six meters, in this case it would be better to install a sliding gate. Sections of such gates can easily move along special guide rollers, which are located in the traditional way – from below and from above. Sliding gates – /otkatnye-vorota.html are suitable for entering a personal plot, they are rarely used for a garage.
When you pay attention to the thickness of the metal, you need to understand: in a good gate, the thickness should be at least 2-3 millimeters. This thickness will allow the gate not to bend (not to “play”). In addition, they will freely ride on roller guides. To increase the reinforcement of the entire structure, at their inner side, manufacturers are required to weld special stiffeners made from steel strips or from heavy corners. The most popular corner (today) is a corner 45 millimeters wide. The thicker the corner, the better.
When the choice of gates begins to concern industrial premises, to reduce the cost of the order, you can use inexpensive sheet steel or a simple steel corrugated board made in a horizontal design.
Here the choice is already obvious: corrugated board is characterized by low cost. Certain modifications of it have an organic polymer or zinc coating. In practice, this means that your gate will serve for a very long time.
In a cottage situation, the use of inexpensive, very rough corrugated board, of course, may not be the right choice.
That is why some of the gate masters recommend using “standard siding”, which optimally combines a neat appearance along with a tolerant price.
Therefore, if it is important for someone to see who has come to visit you, the best choice would be a lattice structure made of wrought iron (or ordinary cast iron). You need to know that this type of gate is quite expensive.
With any choice, the quality of the gate directly depends on both specialists and initial materials. Accordingly, if there is complete order with all such components, we can expect that the gate will also turn out to be beautiful, stylish and very reliable.