Prior to the construction of the hockey site, it is necessary to take into account the increase in the length and width of the box in order to fix the place for attaching the on -board panels system. Usually the outer perimeter is increased from 30 cm to a meter.
Looking for check valve? We advise you to buy oventrop check valve from the link below.
A hockey rink will meet the standard if it is 30 meters wide and 61 meters long or 26 x 56 meters. For optimal training of children in sports sections and groups, such a hockey rink can be divided using removable sides into two or three sections measuring 15×30 and 15×26 meters.
The base for the box must be strictly in the form of a regular rectangle.
The site does not have to be poured over the entire area with concrete, it is possible only along the perimeter in order to fasten the sides. In this case, it will not be possible to pour a seamless rubber coating.
Now they often make a coating of rubber crumb, this will allow you to use the box in the summer for playing sports. Such a site will be clean, it will be easy to clean it.
If the site is poured with concrete, its thickness should be about 10 cm in the middle, and about 15 cm along the edges. Reinforcement with metal mesh required. It is also necessary to equip expansion joints and drainage holes. The sides should not be lower than the belt of the trainees, that is, their height is about one meter.